Graphics Blaster RIVA TNT2 Value
Installation Guide
Introduction .................................................................................................................1
Preliminary step for Windows 95 users.......................................................................3
Installing Your Graphics Card.....................................................................................4
Installing Software.......................................................................................................6
Changing Settings...................................................................................................... 10
About Sonnetech Colorific/3Deep............................................................................. 12
Getting More Information ......................................................................................... 14
Technical Specifications............................................................................................ 16
Troubleshooting......................................................................................................... 20
Contents
™
™
The Graphics Blaster RIVA TNT2 Value is a high quality 2D/3D/video graphics
accelerator card that is well suited for a wide variety of applications ranging from everyday
desktop use to gaming and entertainment.
Introduction
™
Leveraging NVIDIA ’s RIVA TNT2 graphics controller, the Graphics Blaster RIVA TNT2
Value delivers high quality and performance. Its dual texture architecture can process 2 pixels
or textures per clock cycle; this enables developers to create special effects such as multi-
layered textures, bump mapping to simulate rough surfaces, and environmental mapping that
gives objects reflective properties. Developers can take advantage of advanced filtering modes
(including trilinear mipmapping and anisotropic filtering) with full scene anti-aliasing to create
realistic images that rival more expensive graphics workstations.
❑ CD-ROM drive installed
❑ Windows 95, Windows 98, Windows NT 4.0 (with Service Pack 3),
or Windows 2000 (when available)
Updating Drivers
To download the latest drivers for Graphics Blaster RIVA TNT2 Value, visit Creative’s Web
site (refer to the Technical Support leaflet for details).
Since Windows automatically detects new hardware and starts the software installation
procedure upon startup, you should verify your Windows version number before installing the
graphics card.
Preliminary step
for Windows 95
users
To verify your Windows 95 version number
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window, double-click the System icon.
Your Windows 95 version number is displayed in the General tabbed page of the Systems
Properties dialog box.
3. Note the version number.
The following are the possible Windows 95 version numbers:
❑ 4.00.950 (Retail version)
Check the appropriate box so that
you can refer to the Windows’
version number quickly during
the software installation process.
❑ 4.00.950A (Retail version)
❑ 4.00.950B (OSR version 2 and 2.1)
❑ 4.00.950C (OSR version 2.5)
Graphics Blaster RIVA TNT2 Value Installation Guide
3
Figure 1 shows you the connectors on the Graphics Blaster RIVA TNT2 Value card.
Installing Your
Graphics Card
Video Expansion connector
Connect to a video expansion board.
VGA Out connector
Connects to your monitor via a monitor cable.
AGP bus connector
Figure 1: The Graphics Blaster RIVA TNT2 Value card.
To install the graphics
card
1. Switch off your computer and all peripheral devices.
2. Disconnect the power cord from the wall outlet.
3. Touch any metallic surface on your computer to discharge any static electricity.
4. Remove the computer cover.
5. Locate a free AGP expansion slot.
Figure 2 shows the various types of expansion slots.
6. Remove the metal plate from the AGP slot.
Keep the screw and metal plate for future use.
If you are replacing an existing
VGA card with Graphics Blaster
RIVA TNT2 Value, please
remember to remove the existing
VGA card.
An AGP slot
7. Align the bus connector of the graphics card with the
expansion slot.
A PCI slot
An ISA slot
Figure 2: Types of expansion slots.
4
Graphics Blaster RIVA TNT2 Value Installation Guide
8. Press the card’s bus connector gently and evenly into the slot, making sure that the bus
connector comes into full contact with the slot. Then, secure the card to the computer casing
with a screw. See Figure 3 below.
ii.Secure the card to the slot
with a screw.
Warning: Do not force the graphics card
into place. If it does not fit properly, gently
remove it and try again.
i. Gently and evenly press the card’s
bus connector into the slot.
Figure 3: Securing the graphics card to the slot.
9. Connect the monitor cable to the VGA Out connector of Graphics Blaster RIVA TNT2
Value, as shown in Figure 4.
VGA Monitor
cable
If you are using a multi-
VGA Out
connector
frequency monitor, you may need
a special 15-pin PS/2-compatible
adapter cable. If your multi-
frequency monitor allows you to
switch between ‘TTL’ and
VGA monitor
Graphics Blaster
RIVA TNT2 Value
‘analog’ operation modes, set the
switch to ‘analog’. For details,
refer to your monitor’s manual.
Figure 4: Connecting your VGA monitor to Graphics Blaster RIVA TNT2 Value.
10. Replace the computer cover and plug the power cord back into the wall outlet.
Graphics Blaster RIVA TNT2 Value Installation Guide
5
After installing the graphics card, you can install the software. The Graphics Blaster RIVA
TNT2 Value CD contains the following:
Installing Software
❑ Drivers for Windows 95/98 (common to both)
❑ Drivers for Windows NT 4.0
❑ Creative Enhanced BlasterControl for Windows 95/98 and Windows NT 4.0
™
❑ Creative SoftMPEG for Windows 95/98
®
™
❑ Sonnetech Colorific /3Deep for Windows 95/98 and Windows NT 4.0
This section is organized as follows:
❑ To install in Windows 95 (Retail version)
❑ To install in Windows 95 (OSR version 2.0 and later)
❑ To install in Windows 98
❑ To install in Windows NT 4.0 (Service Pack 3)
To install in
Windows 95
(Retail version)
1. Switch on your system.
Windows 95 automatically detects the
graphics card.
A New Hardware Found message box
appears, informing you that a display
adapter has been detected.
2. When a dialog box similar to Figure 5
appears, ensure that the Driver from disk
provided by hardware manufacturer
option is selected.
Figure 5: Selecting the Driver from disk provided by
hardware manufacturer option.
3. Click the OK button.
4. Insert the Graphics Blaster RIVA TNT2
Value CD into your CD-ROM drive.
6
Graphics Blaster RIVA TNT2 Value Installation Guide
5. In the Install From Disk dialog box, type D:\WINDOWS (where D: represents your
CD-ROM drive) and click the OK button.
6. If prompted to select drivers, click the Graphics Blaster RIVA TNT2 Value drivers.
The drivers are copied to your system.
7. When prompted to restart your system, click the Yes button.
8. After the system has restarted, proceed to install the applications. Click Start -> Run.
9. In the Run dialog box, type D:\WINDOWS\SETUP and click the OK button.
10. Follow the instructions on the screen to complete the setup.
If you do not install all the applications now, you can install them later.
To install in
1. Switch on your system.
Windows 95 automatically detects the graphics card.
A New Hardware Found message box appears, informing you that a display adapter has
been detected.
Windows 95
(OSR version 2.0 and
later)
2. When a dialog box similar to Figure 6
appears, click the Next button.
3. Click the Other Locations button when it
appears in the Update Device Driver
Wizard dialog box.
4. Insert the Graphics Blaster RIVA TNT2
Value CD into your CD-ROM drive.
5. In the Select Other Location dialog box,
type D:\WINDOWS (where D: represents
your CD-ROM drive) and click the OK
button.
Figure 6: The Update Device Driver Wizard dialog box.
6. In the Update Device Driver Wizard
dialog box, click the Finish button.
7. In the Insert Disk message box, click the OK button.
Graphics Blaster RIVA TNT2 Value Installation Guide
7
8. In the Copying Files dialog box, type D:\WINDOWS and click the OK button.
The drivers are copied to your system.
9. In the Update Device Driver Wizard dialog box, click the OK button.
10. When prompted to restart your system, click the Yes button.
11. After the system has restarted, proceed to install the applications. Click Start -> Run.
12. In the Run dialog box, type D:\WINDOWS\SETUP and click the OK button.
13. Follow the instructions on the screen to complete the setup.
If you do not install all the applications now, you can install them later.
To install in
Windows 98
1. Switch on your system.
Windows 98 automatically detects the graphics card.
An Add New Hardware Wizard message box appears, informing you that a display adapter
has been detected.
2. When a dialog box similar to Figure 7
appears, select the option Display a list of
all the drivers in a specific location, so
you can select the driver you want.
3. Click the Next button.
4. Insert the Graphics Blaster RIVA TNT2
Value CD into your CD-ROM drive.
5. In the Models list box, click the Have Disk
button.
Figure 7: Selecting the option Display a list of all the
drivers in a specific location, so you can
select the driver you want.
8
Graphics Blaster RIVA TNT2 Value Installation Guide
6. In the Install From Disk dialog box, type D:\WINDOWS (where D: represents your
CD-ROM drive) and click the OK button.
If you are installing Graphics Blaster RIVA TNT2 Value as a second or subsequent card to
make use of Windows 98’s multi-monitor capability, you will see an Update Driver
Warning message telling you that the driver you have selected may not work correctly. You
must click the Yes button to confirm that you want to use the selected driver. Otherwise, the
system will install the wrong driver and will not recognize the card as a Graphics Blaster
RIVA TNT2 Value card (for details, see “Windows 98 Multi-Monitor Display Problems” on
page 20).
7. In the Models list box of the Select Device dialog box, make sure the Graphics Blaster
RIVA TNT2 Value entry is selected and click the OK button.
8. Click the Next button.
9. Click the Finish button.
The drivers are copied to your system.
10. When prompted to restart your system, click the Yes button.
11. After the system has restarted, proceed to install the applications. Click Start -> Run.
12. In the Run dialog box, type D:\WINDOWS\SETUP and click the OK button.
13. Follow the instructions on the screen to complete the setup.
If you do not install all the applications now, you can install them later.
To install in
Windows NT 4.0
(Service Pack 3)
1. Switch on your system.
2. Click Start -> Run.
3. In the Run dialog box, type D:\WINNT40\SETUP and click the OK button.
4. Follow the instructions on the screen to complete the setup.
If you do not install all the applications now, you can install them later.
5. If the Invalid Display Settings message box appears after your system has restarted, click
the OK button and change the display settings.
For details, see “To change the display settings in Windows NT 4.0” on page 10.
Graphics Blaster RIVA TNT2 Value Installation Guide
9
Changing Settings
To change the
display settings in
Windows NT 4.0
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab.
3. In the Desktop Area group box, move the slider to set the desired resolution.
4. In the Color Palette group box, select the desired color. Certain colors may not be available
for some display resolutions.
5. In the Refresh Frequency group box, select the desired refresh rate.
6. To test the settings, click the Test button, and then click the OK button.
When the Testing Mode dialog box re-appears:
•
•
If the test bitmap is properly displayed, click the Yes button.
If not, click the No button. A warning message will be displayed. Click the OK button
and repeat steps 3 through 6, changing one or more of the settings.
7. Click the OK button to close the Display Properties dialog box.
10 Graphics Blaster RIVA TNT2 Value Installation Guide
To change the
To do so in Windows 95 and Windows NT 4.0
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the BlasterControl tab.
3. On the BlasterControl tabbed page, click the Tweak icon.
4. In the Tweak module, select the desired settings.
performance settings in
Windows 95/98 and
Windows NT 4.0
5. To specify additional settings for Graphics Blaster RIVA TNT2 Value, click the Advanced
Settings button.
6. Select the desired settings and click the OK button.
You can customize the settings of
your graphics card for optimal
performance with applications.
However, if your monitor display
exhibits pixel drop (that is,
To see a brief description of an option or check box in the BlasterControl Tweak module,
right-click the item, and then click What’s This.
To do so in Windows 98
pixels, usually white in color,
appear on the screen) or any
other abnormal behavior, revert
to the factory default settings (see
“Troubleshooting” on page 12.).
1. Right-click your desktop, and then click Properties on the menu that appears.
2. In the Display Properties dialog box, click the Settings tab.
3. On the Settings tabbed page, click the Advanced button.
4. In the Advanced Properties dialog box, click the BlasterControl tab.
5. Select the desired settings and click the OK button.
To see a brief description of an option or check box in the BlasterControl Advanced
module, right-click the item, and then click What’s This.
Graphics Blaster RIVA TNT2 Value Installation Guide 11
About Sonnetech
Colorific/3Deep
®
About Colorific
Colorific color management software is the industry-standard process for monitor-to-
monitor and monitor-to-printer color management. It gives you accurate, predictable color-
matching between your screen and printer or over the Internet by calibrating the colors on your
monitor. The software leads you through a series of simple choices about what you see on your
screen. From this information, Colorific builds a precise description of how your monitor
displays color, taking into account variable viewing conditions, monitor control settings, and
video card adjustments.
Running Colorific
You should calibrate with Colorific before doing critical color work and whenever you change
monitor color settings.
To run Colorific in Windows 95, Windows 98 and Windows NT 4.0
1. Click the Colorific Control Panel icon in the taskbar.
• If your monitor has a color
temperature control, adjust it
to 6500 K to get the best
results.
The Display Properties dialog box appears.
2. Click the Colorific tab.
3. Click the Recalibrate button.
• When printing to an inkjet
printer, it is best to use special
coated paper.
The Colorific calibration utility is opened.
4. Follow the instructions on the screen to complete the process.
™
About 3Deep
3Deep is an exciting new tool (supporting Windows 95 and Windows 98) that allows gamers
to experience 3D games as the game developers intended. Only 3Deep can provide accurate
3D lighting and shading for 3D games because it adjusts the user’s monitor to match the game
developer’s monitor — not too dark and not washed out.
12 Graphics Blaster RIVA TNT2 Value Installation Guide
3Deep uses Colorific’s technology (the industry standard for monitor calibration) to measure
the unique characteristics of each gamer’s display. No more dark games, and no more washed
out games when you increase the contrast of your monitor. The results are awesome 3D
lighting and shading effects. 3Deep is a consistent and high-quality solution for improving the
3D effect of your games!
Using 3Deep
To use 3Deep to calibrate your monitor’s gamma value
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window, double-click the 3Deep icon.
3. On the 3Deep Control Panel, move the Tweak slider or click the Calibrate Display button.
4. Before playing a game, click Default System Gamma.
You can also display the 3Deep Control Panel by doing the following:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the 3Deep tab.
To uninstall Colorific in
Windows 95/98 and
Windows NT 4.0, and
3Deep in Windows
95/98
1. Right-click the Colorific Control Panel icon in the taskbar.
2. On the menu that appears, click Exit.
3. Click Start -> Settings -> Control Panel.
4. In the Control Panel window, double-click the Add/Remove Programs icon.
The Add/Remove Programs Properties dialog box appears with the Install/Uninstall
tabbed page displayed.
5. Select the entry Colorific For Windows from the list, and then click the Add/Remove
button.
6. After Colorific For Windows is removed, select the entry 3Deep from the list, and then
click the Add/Remove button.
Graphics Blaster RIVA TNT2 Value Installation Guide 13
Getting More
Information
For Graphics Blaster
RIVA TNT2 Value
The Help file for Graphics Blaster RIVA TNT2 Value gives a brief introduction to the features
supported by this graphics card.
To open the Help file for Graphics Blaster RIVA TNT2 Value
Click Start -> Programs -> Creative -> Graphics Blaster RIVA TNT2 Value ->
Graphics Blaster RIVA TNT2 Value Help.
For Creative
BlasterControl
The Help file for Creative BlasterControl shows you how to use the BlasterControl utility to
customize your screen resolution, color depth, and refresh rate in Windows.
To open the Help file for BlasterControl
Click Start -> Programs -> Creative -> BlasterControl Help.
For Help topics specific to a BlasterControl module
In the BlasterControl module you want, click the Help button.
For Creative SoftMPEG The Help file for Creative SoftMPEG teaches you how to use SoftMPEG to play Video CDs
and MPEG files.
To open the Help file for SoftMPEG
In Creative SoftMPEG, right-click the Video window, and then click Help on the menu that
appears.
14 Graphics Blaster RIVA TNT2 Value Installation Guide
For Colorific and
3Deep
The Help file for Colorific contains the User’s Manual.
To open the Help file for Colorific
1. Click Start -> Programs -> Colorific.
The Colorific calibration utility is opened.
2. On the right-hand corner of the menu bar, click Help.
3. On the Help menu, click Help Contents.
To open the Help file for 3Deep
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window, double-click the 3Deep icon.
3. On the 3Deep Control Panel, click the Help button.
Technical Support for
Colorific and 3Deep
Updated information about using Colorific and 3Deep can be obtained from Sonnetech’s Web
the Web site or in the program’s Help screens, send an e-mail message to [email protected].
Graphics Blaster RIVA TNT2 Value Installation Guide 15
Technical
Specifications
Architecture Highlights
❑ 64-bit wide graphics engine and frame buffer
❑ 16 MB SDRAM
❑ 250 million pixels/sec, bilinear filtered
3D Features
❑ Optimized for Microsoft’s Direct3D API
❑ Complete DirectX 6.x support
❑ 100% hardware triangle setup
❑ Twin texel (TNT) 32-bit graphics pipeline
•
•
•
2 texture-mapped, lit pixels per clock
Single pass multi-texturing support (DirectX 6.x and OpenGL ICD)
Square and non-square texture support
❑ TextureBlend support examples:
•
•
•
•
•
•
•
•
•
Multi-texture
Bump map
Texture modulation
Light maps
Reflection maps
Detail textures
Environmental maps
Procedural textures
Sub-pixel accurate
16 Graphics Blaster RIVA TNT2 Value Installation Guide
❑ Backend blend
•
•
•
32-bit ARGB rendering with destination alpha
Point sampled, bilinear, trilinear and 8-tap
Anisotropic filtering
❑ Per pixel perspective correct texture mapping
•
•
•
Fog
Light
Mipmapping
❑ 24-bit or 16-bit hardware Z-buffer (fixed or floating)
❑ 8-bit stencil buffer
❑ Full scene anti-aliasing
2D Features
❑ High performance 128-bit 2D/GUI/DirectDraw acceleration
•
•
Accelerated primitives include BLT, indexed DIB color translation, transparent BLT,
stretch BLT, points, lines, polylines, polygons, fills, patterns, arbitrary rectangular
clipping and fast text rendering hardware font cache
Pipeline optimized for multiple color depths including 32, 24, 16, 15, and 8 bits per
pixel
❑ Fast 32-bit VGA/SVGA support
❑ Multi-buffering (Double, Triple, Quad buffering) for smooth animation and video playback
Video Support
❑ Video acceleration for DirectShow, MPEG-1, MPEG-2 and Indeo
❑ X and Y smooth up and down scaling with filtering
❑ Per-pixel color keying
❑ Multiple video windows with hardware color space conversion and filtering (YUV 4:2:2
and 4:2:0)
❑ Video port supports ITU-CCIR 565
Graphics Blaster RIVA TNT2 Value Installation Guide 17
Specifications
❑ AGP 2X data transfer
❑ VESA DDC 2B + DPMS
❑ Single slot 2D, 3D graphics, and video accelerator
❑ NVIDIA RIVA TNT2 Model 64 graphics engine
❑ Integrated 300 MHz RAMDAC supporting up to 1920x1200 true color
❑ MPEG-1, MPEG-2, and full-motion video acceleration/assistance
❑ Full Plug and Play compliant
Drivers
❑ Windows NT 4.0 and Windows 2000 (when available) display drivers
❑ Windows 95 and Windows 98 display driver, DirectDraw, Direct3D, DirectVideo, ActiveX
❑ OpenGL ICD for Windows 95 and Windows NT 4.0
❑ VBE 3.0 compliant
Utilities
❑ Creative Enhanced BlasterControl
❑ Creative Enhanced SoftMPEG
❑ Sonnetech Colorific/3Deep
Applications Supported
❑ All Windows 95 applications, including DirectDraw and Direct3D games and applications
❑ OpenGL applications under Windows 95 and Windows 98
18 Graphics Blaster RIVA TNT2 Value Installation Guide
Table 2:
Refresh rates supported by different video modes
Refresh
Rates
Number of Colors
64k (16-bit)
Resolution
256 (8-bit)
16.7 million (32-bit)
The refresh rates shown in the
table are the highest obtainable
and are monitor-dependent.
Resolutions, pixel depths, and
refresh rates are also driver-
dependent and may not be
available for some applications
or operating systems.
60, 70, 72, 75, 85, 100, 60, 70, 72, 75, 85, 100, 60, 70, 72, 75, 85, 100,
640x480
800x600
120, 140, 144, 150,
170, 200, 240
120, 140, 144, 150,
170, 200, 240
120, 140, 144, 150,
170, 200, 240
60, 70, 72, 75, 85, 100, 60, 70, 72, 75, 85, 100, 60, 70, 72, 75, 85, 100,
120, 140, 144, 150,
170, 200, 240
120, 140, 144, 150,
170, 200, 240
120, 140, 144, 150,
170, 200, 240
60, 70, 72, 75, 85, 100, 60, 70, 72, 75, 85, 100, 60, 70, 72, 75, 85, 100,
120, 140, 144, 150, 170 120, 140, 144, 150, 170 120, 140, 144, 150, 170
1024x768
1152x864
1280x1024
60, 70, 72, 75, 85, 100, 60, 70, 72, 75, 85, 100, 60, 70, 72, 75, 85, 100,
120, 140, 144, 150
120, 140, 144, 150
120, 140
60, 70, 72, 75, 85, 100, 60, 70, 72, 75, 85, 100,
60, 70, 72, 75, 85, 100
120
120
1600x1200
1920x1080
1920x1200
60, 70, 72, 75, 85
60, 70, 72, 75, 85
60, 70, 72, 75
60, 70, 72, 75, 85
60, 70, 72, 75, 85
60, 70, 72, 75
60, 70, 72, 75
60, 70, 72
—
Graphics Blaster RIVA TNT2 Value Installation Guide 19
Troubleshooting
System Hangs, Blank Screen
or Corrupted Display
$IWHUꢀLQVWDOOLQJꢀ*UDSKLFVꢀ%ODVWHUꢀ5,9$ꢀ717ꢁꢀ9DOXHꢀDQGꢀVWDUWLQJꢀ\RXUꢀV\VWHPꢂꢀWKHꢀ
PRQLWRUꢀGLVSOD\VꢀDꢀEODQNꢀVFUHHQꢃ
Solutions
Try the following:
❑ Switch off your system and wait a while before switching it on again.
❑ Verify that any built-in VGA on your motherboard is disabled and that you
have removed any other video display card from your system.
❑ Ensure that your Graphics Blaster RIVA TNT2 Value card’s bus connector is
fully inserted into the expansion slot. Ensure this by pressing it gently and
evenly into the slot.
❑ Verify that the pins of your monitor’s VGA Input connector are not bent and
that the connector is properly connected to the VGA Out connector of
Graphics Blaster RIVA TNT2 Value.
Windows 98 Multi-Monitor
Display Problems
7KHꢀPRQLWRUꢀFRQQHFWHGꢀWRꢀWKHꢀVHFRQGꢀRUꢀVXFFHVVLYHꢀ*UDSKLFVꢀ%ODVWHUꢀ5,9$ꢀ717ꢁꢀ
9DOXHꢀFDUGꢀUHPDLQVꢀEODQNꢀHYHQꢀWKRXJKꢀWKHꢀFDUGꢀDQGꢀLWVꢀGULYHUVꢀKDYHꢀEHHQꢀLQVWDOOHGꢃ
Cause
If Graphics Blaster RIVA TNT2 Value’s drivers are not specified during the
software installation (see “To install in Windows 98” on page 8), the system
installs the second or successive Graphics Blaster RIVA TNT2 Value card as a
VGA card which does not support Windows 98’s multi-monitor feature.
Solution
Update the device drivers to Graphics Blaster RIVA TNT2 Value’s drivers:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab.
3. On the Settings tabbed page, click the Advanced Properties button.
4. In the Advanced Display Properties dialog box, click the Change button.
5. In the Select Device dialog box, click the Have Disk button.
20 Graphics Blaster RIVA TNT2 Value Installation Guide
6. Insert the Graphics Blaster RIVA TNT2 Value CD into your CD-ROM drive.
7. Follow steps 6 through 13 of the procedure in “To install in Windows 98” on
page 8 to complete the update.
Other Display Problems
0RQLWRUꢀGLVSOD\ꢀIOLFNHUVꢀRUꢀWKHꢀVFUHHQꢀJRHVꢀEODQNꢀDIWHUꢀ:LQGRZVꢀVWDUWVꢃ
Cause
Your monitor may not support the resolution or refresh rate that you have set.
Solution
Use display settings supported by the monitor.
To change the display settings:
1. Restart your system in Windows 98 Safe mode. To do so:
For the resolutions supported by
your monitor, refer to its manual.
i. Restart your system and when the message “Starting Windows 98...”
appears, press <F8>.
A list of options such as Safe Mode and Command Prompt Only Mode
appears.
ii. Select Safe Mode and press <Enter>.
2. After your system has restarted, right-click the desktop and click Properties.
3. In the Display Properties dialog box, click the Settings tab.
4. Try the following:
❑ Make sure that the correct monitor is selected.
To verify, click the Change Display Type button or the Advanced
Properties button on the Settings tabbed page.
❑ Use a lower refresh rate or the adapter’s default.
For details on this, refer to the topic “Using BlasterControl Monitor
Settings” in the BlasterControl Help file.
❑ Lower your monitor’s resolution.
To do so, adjust the color depth and desktop area on the Settings tabbed
page.
Graphics Blaster RIVA TNT2 Value Installation Guide 21
0RQLWRUꢀGLVSOD\ꢀH[KLELWVꢀSL[HOꢀGURSꢀꢄWKDWꢀLVꢂꢀSL[HOVꢂꢀXVXDOO\ꢀZKLWHꢀLQꢀFRORUꢂꢀDSSHDUꢀRQꢀ
WKHꢀVFUHHQꢅꢀRUꢀRWKHUꢀDEQRUPDOꢀEHKDYLRUꢃ
Cause
The settings that you have selected for your graphics card may be incompatible
with one or more games or applications that you are running.
Solution
Use the factory default settings:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the BlasterControl tab.
3. On the BlasterControl tabbed page, click the Tweak icon.
4. Click the Restore Defaults button.
Beeping Sounds During
System Startup
:KHQꢀWKHꢀV\VWHPꢀLVꢀVWDUWLQJꢀXSꢂꢀWKHUHꢀLVꢀDꢀVHULHVꢀRIꢀSURORQJHGꢀEHHSVꢃ
Cause
Your Graphics Blaster RIVA TNT2 Value card may not be firmly inserted into the
expansion slot.
Solution
Ensure that the bus connector of the graphics card is fully inserted into the
expansion slot. Ensure this by pressing the card gently and evenly into the slot.
You can also try removing the card and re-inserting it.
Problems Installing Software ,Qꢀ:LQGRZVꢀꢆꢇꢀRUꢀ:LQGRZVꢀꢆꢈꢂꢀWKHꢀLQVWDOODWLRQꢀSURJUDPꢀIRUꢀ%ODVWHU&RQWUROꢀGRHVꢀQRWꢀ
UXQꢀDXWRPDWLFDOO\ꢀDIWHUꢀ\RXꢀKDYHꢀLQVHUWHGꢀWKHꢀLQVWDOODWLRQꢀ&'ꢀLQWRꢀ\RXUꢀGULYHꢃ
Cause
The AutoPlay feature in your Windows 95 or Windows 98 system is not enabled.
To install the software from the CD:
Solution
1. Double-click the My Computer icon on your Windows desktop.
2. In the My Computer window, double-click the Creative Graphics Blaster
RIVA TNT2 Value icon.
If the installation program does not run, double-click the Windows folder
icon followed by the Setup icon.
3. Follow the instructions on the screen to complete the installation.
22 Graphics Blaster RIVA TNT2 Value Installation Guide
Problems Using Software
:KHQꢀ\RXꢀUHVWDUWꢀ:LQGRZVꢂꢀRQHꢀRIꢀWKHꢀIROORZLQJꢀHUURUꢀPHVVDJHVꢀDSSHDUVꢉ
❑ “BlasterControl will only work on Creative graphics product drivers.
Do you want BlasterControl to be loaded the next time you start Windows?”
❑ “BlasterControl will only work on Creative graphics product drivers.”
Cause
Graphics Blaster RIVA TNT2 Value drivers, required by BlasterControl, may
have been replaced by other drivers when you installed DirectX applications.
Solution
Re-install or revert to the Graphics Blaster RIVA TNT2 Value drivers.
To revert to the drivers:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab, and then click
the Change Display Type button or the Advanced Properties button.
3. In the Adapter Type group box or on the Adapter tabbed page, click the
Change button.
4. In the Select Device dialog box, click Graphics Blaster RIVA TNT2 Value,
and then click the OK button.
5. In the Insert Disk message box, click the OK button without inserting any
CD.
6. If Graphics Blaster RIVA TNT2 Value drivers and later versions of DirectX
drivers are already installed, click the Skip File button until the Adapter Type
group box or the Adapter tabbed page appears.
7. Click the two Close buttons to close the Display Properties dialog box.
8. When prompted to restart your system, click the Yes button.
After you have restarted your system, the newer DirectX drivers will work
with the latest Graphics Blaster RIVA TNT2 Value drivers.
Graphics Blaster RIVA TNT2 Value Installation Guide 23
Problem with OpenGL
Applications
:KHQꢀVWDUWLQJꢀ2SHQ*/ꢀ6FUHHQꢀ6DYHUꢀRUꢀDSSOLFDWLRQVꢀLQꢀ:LQGRZVꢀꢆꢈꢂꢀWKHꢀPHVVDJHꢀ
´1RꢀORFDOꢀEXIIHUꢀPHPRU\ꢀDYDLODEOHµꢀDSSHDUVꢃ
Solution
Set a lower resolution and color depth:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab.
3. In the Desktop Area group box, move the slider to set a lower resolution.
4. In the Color Palette group box, set to 640x480 and 16-bit color (high color)
for OpenGL applications to work properly.
2SHQ*/ꢀDSSOLFDWLRQVꢀUXQꢀXQFKDUDFWHULVWLFDOO\ꢀVORZO\ꢀLQꢀ:LQGRZVꢀꢆꢈꢃ
Cause
OpenGL applications do not support Windows 98’s multi-monitor feature.
Consequently, Windows 98 disables all hardware acceleration when the multi-
monitor option is enabled.
Solution
Disable the multi-monitor option:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab.
3. Clear the Extend my Windows desktop onto this monitor check box.
Problem with PCI Bridge
(in Windows 95)
$IWHUꢀLQVWDOOLQJꢀ*UDSKLFVꢀ%ODVWHUꢀ5,9$ꢀ717ꢁꢀ9DOXHꢀRQWRꢀDꢀ3HQWLXPꢀ,,ꢀ/;ꢀV\VWHPꢀRUꢀDQ\ꢀ
RWKHUꢀ$*3ꢀV\VWHPꢂꢀWKHꢀ5HVRXUFHVꢀWDEEHGꢀSDJHꢀRIꢀWKHꢀ5,9$ꢀ717ꢁꢀ9DOXHꢀ3URSHUWLHVꢀ
GLDORJꢀER[ꢀLQꢀ:LQGRZVꢀꢆꢇꢀVKRZVꢀUHVRXUFHꢀFRQIOLFWVꢀVLPLODUꢀWRꢀWKHꢀIROORZLQJꢉ
0HPRU\ꢀ5DQJHꢀXVHGꢀ)('&ꢊꢊꢊꢊꢀꢋꢀ)(''))))ꢀXVHGꢀE\ꢀ3&,ꢀVWDQGDUGꢀ3&,ꢋWRꢋ3&,ꢀEULGJHꢃ
0HPRU\ꢀ5DQJHꢀXVHGꢀ)'ꢈꢊꢊꢊꢊꢊꢀꢋꢀ)'))))))ꢀXVHGꢀE\ꢀ3&,ꢀVWDQGDUGꢀ3&,ꢋWRꢋ3&,ꢀEULGJHꢃ
0HPRU\ꢀ5DQJHꢀXVHGꢀ)(ꢊꢊꢊꢊꢊꢊꢀꢋꢀ)(ꢌ)))))ꢀXVHGꢀE\ꢀ3&,ꢀVWDQGDUGꢀ3&,ꢋWRꢋ3&,ꢀEULGJHꢃ
Cause
The “PCI standard PCI-to-PCI bridge” is the CPU chipset to AGP controller,
which Windows 95 cannot identify properly.
24 Graphics Blaster RIVA TNT2 Value Installation Guide
Solution
No action required.
A conflict between the AGP video controller and the “PCI standard PCI-to-PCI
bridge” in the Windows 95 Device Manager does not affect the functionality of
the AGP card within Windows 95. This problem is common to all AGP graphics
cards and does not affect Graphics Blaster RIVA TNT2 Value’s functionality. It
has been resolved in Windows 98.
Problem with AGP
Aperture Size
'LUHFW'UDZꢍ'LUHFWꢎ'ꢀIDLOVꢀWRꢀXVHꢀKDUGZDUHꢀDFFHOHUDWLRQꢀꢄ+$/ꢅꢃ
Cause
The CMOS setting for the AGP Aperture size is less than 8 MB.
Solution
Set the AGP Aperture size to 8 MB or more.
Do the following in CMOS:
1. Restart your system.
Changing settings in CMOS
incorrectly can cause the system
to stop functioning.
2. During the memory check, press <Delete>.
The CMOS setup menu appears.
3. Select Chipset Features Setup and press <Enter>.
4. Set your AGP Aperture Size (MB) to 8 MB or more.
5. Press <Esc> to return to the CMOS setup menu.
6. Select Save & Exit Setup, and then press <Enter>.
7. Press <Y> and then press <Enter>.
Some of the steps from step 3
onwards may not apply to your
system’s CMOS. Refer to your
system’s CMOS documentation
for more details.
Graphics Blaster RIVA TNT2 Value Installation Guide 25
Creative End-User Software License Agreement
Version 2.0, June 1998
PLEASE READ THIS DOCUMENT CAREFULLY BEFORE USING THE SOFTWARE. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF
YOU DO NOT AGREE TO THE TERMS OF THE AGREEMENT, DO NOT OPEN THE SEALED DISK PACKAGE, INSTALL OR USE THE SOFTWARE. PROMPTLY RETURN, WITHIN 15 DAYS,
THE SOFTWARE, ALL RELATED DOCUMENTATION AND ACCOMPANYING ITEMS TO THE PLACE OF ACQUISITION FOR A FULL REFUND.
This is a legal agreement between you and Creative Technology Ltd. and its
subsidiaries (“Creative”). This Agreement states the terms and conditions upon
which Creative offers to license the software sealed in the disk package together
with all related documentation and accompanying items including, but not limited
to, the executable programs, drivers, libraries and data files associated with such
programs (collectively, the “Software”).
must also have its own license of a “node copy” of the Software, which
becomes a license only for that specific “node”.
Agreement. Any representation, other than the warranties set forth in this
Agreement, will not bind Creative.
Creative does not warrant that the functions contained in the Software will meet
your requirements or that the operation of the Software will be uninterrupted, error-
free or free from malicious code. For purposes of this paragraph, “malicious code”
means any program code designed to contaminate other computer programs or
computer data, consume computer resources, modify, destroy, record, or transmit
data, or in some other fashion usurp the normal operation of the computer,
computer system, or computer network, including viruses, Trojan horses, droppers,
worms, logic bombs, and the like. EXCEPT AS STATED ABOVE IN THIS
AGREEMENT, THE SOFTWARE IS PROVIDED AS-IS WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE.
CREATIVE IS NOT OBLIGATED TO PROVIDE ANY UPDATES,
UPGRADES OR TECHNICAL SUPPORT FOR THE SOFTWARE.
8. Transfer of License
You may transfer your license of the Software, provided that (a) you transfer
all portions of the Software or copies thereof, (b) you do not retain any portion
of the Software or any copy thereof, and (c) the transferee reads and agrees to
be bound by the terms and conditions of this Agreement.
LICENSE
1. Grant of License
9. Limitations on Using, Copying, and Modifying the Software
Except to the extent expressly permitted by this Agreement or by the laws of
the jurisdiction where you acquired the Software, you may not use, copy or
modify the Software. Nor may you sub-license any of your rights under this
Agreement.
The Software is licensed, not sold, to you for use only under the terms of this
Agreement. You own the disk or other media on which the Software is
originally or subsequently recorded or fixed; but, as between you and Creative
(and, to the extent applicable, its licensors), Creative retains all title to and
ownership of the Software and reserves all rights not expressly granted to you.
10. Decompiling, Disassembling, or Reverse Engineering
2. For Use on a Single Computer
You acknowledge that the Software contains trade secrets and other proprietary
information of Creative and its licensors. Except to the extent expressly
permitted by this Agreement or by the laws of the jurisdiction where you are
located, you may not decompile, disassemble or otherwise reverse engineer the
Software, or engage in any other activities to obtain underlying information
that is not visible to the user in connection with normal use of the Software.
The Software may be used only on a single computer by a single user at any
time. You may transfer the machine-readable portion of the Software from one
computer to another computer, provided that (a) the Software (including any
portion or copy thereof) is erased from the first computer and (b) there is no
possibility that the Software will be used on more than one computer at a time.
Further, Creative shall not be liable for the accuracy of any information provided
by Creative or third-party technical support personnel, or any damages caused,
either directly or indirectly, by acts taken or omissions made by you as a result of
such technical support.
3. Stand-Alone Basis
You assume full responsibility for the selection of the Software to achieve your
intended results, and for the installation, use and results obtained from the
Software. You also assume the entire risk as it applies to the quality and
performance of the Software. Should the Software prove defective, you (and not
Creative, or its distributors or dealers) assume the entire cost of all necessary
servicing, repair or correction.
In particular, you agree not for any purpose to transmit the Software or display
the Software’s object code on any computer screen or to make any hardcopy
memory dumps of the Software’s object code. If you believe you require
information related to the interoperability of the Software with other programs,
you shall not decompile or disassemble the Software to obtain such
information, and you agree to request such information from Creative at the
address listed below. Upon receiving such a request, Creative shall determine
whether you require such information for a legitimate purpose and, if so,
Creative will provide such information to you within a reasonable time and on
reasonable conditions.
You may use the Software only on a stand-alone basis, such that the Software
and the functions it provides are accessible only to persons who are physically
present at the location of the computer on which the Software is loaded. You
may not allow the Software or its functions to be accessed remotely, or transmit
all or any portion of the Software through any network or communication line.
4. Copyright
This warranty gives you specific legal rights, and you may also have other rights
which vary from country/state to country/state. Some countries/states do not allow
the exclusion of implied warranties, so the above exclusion may not apply to you.
Creative disclaims all warranties of any kind if the Software was customized,
repackaged or altered in any way by any third party other than Creative.
The Software is owned by Creative and is protected by United States copyright
laws and international treaty provisions. You may not remove the copyright
notice from any copy of the Software or any copy of the written materials, if
any, accompanying the Software.
In any event, you will notify Creative of any information derived from reverse
engineering or such other activities, and the results thereof will constitute the
confidential information of Creative that may be used only in connection with
the Software.
5. One Archival Copy
LIMITATION OF REMEDIES AND DAMAGES
You may make one (1) archival copy of the machine-readable portion of the
Software for backup purposes only in support of your use of the Software on a
single computer, provided that you reproduce on the copy all copyright and
other proprietary rights notices included on the originals of the Software.
THE ONLY REMEDY FOR BREACH OF WARRANTY WILL BE THAT
SET FORTH IN THE WARRANTY CARD OR PRINTED MANUAL
INCLUDED WITH THE SOFTWARE. IN NO EVENT WILL CREATIVE
OR ITS LICENSORS BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OR FOR ANY LOST
PROFITS, LOST SAVINGS, LOST REVENUES OR LOST DATA ARISING
FROM OR RELATING TO THE SOFTWARE OR THIS AGREEMENT,
EVEN IF CREATIVE OR ITS LICENSORS HAVE BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL
CREATIVE’S LIABILITY OR DAMAGES TO YOU OR ANY OTHER
PERSON EVER EXCEED THE AMOUNT PAID BY YOU TO USE THE
SOFTWARE, REGARDLESS OF THE FORM OF THE CLAIM. Some
countries/states do not allow the limitation or exclusion of liability for incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
TERMINATION
The license granted to you is effective until terminated. You may terminate it at
any time by returning the Software (including any portions or copies thereof) to
Creative. The license will also terminate automatically without any notice from
Creative if you fail to comply with any term or condition of this Agreement. You
agree upon such termination to return the Software (including any portions or
copies thereof) to Creative. Upon termination, Creative may also enforce any
rights provided by law. The provisions of this Agreement that protect the
proprietary rights of Creative will continue in force after termination.
6. No Merger or Integration
You may not merge any portion of the Software into, or integrate any portion
of the Software with, any other program, except to the extent expressly
permitted by the laws of the jurisdiction where you are located. Any portion
of the Software merged into or integrated with another program, if any, will
continue to be subject to the terms and conditions of this Agreement, and you
must reproduce on the merged or integrated portion all copyright and other
proprietary rights notices included in the originals of the Software.
LIMITED WARRANTY
7. Network Version
Creative warrants, as the sole warranty, that the disks on which the Software is
furnished will be free of defects, as set forth in the Warranty Card or printed manual
included with the Software. No distributor, dealer or any other entity or person is
authorized to expand or alter this warranty or any other provisions of this
If you have purchased a “network” version of the Software, this Agreement
applies to the installation of the Software on a single “file server”. It may not
be copied onto multiple systems. Each “node” connected to the “file server”
26 Graphics Blaster RIVA TNT2 Value Installation Guide
PRODUCT RETURNS
MERCHANTABILITY, QUALITY AND FITNESS FOR A PARTICULAR
PURPOSE.
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try one or more of the following
measures:
If you must ship the software to Creative or an authorized Creative distributor or
dealer, you must prepay shipping and either insure the software or assume all risk
of loss or damage in transit.
LIMITATION OF REMEDY AND DAMAGES
THE LIMITATIONS OF REMEDIES AND DAMAGES IN THE
SOFTWARE LICENSE AGREEMENT SHALL NOT APPLY TO
PERSONAL INJURY (INCLUDING DEATH) TO ANY PERSON CAUSED
BY CREATIVE’S NEGLIGENCE AND ARE SUBJECT TO THE
PROVISION SET OUT UNDER THE HEADING “STATUTORY RIGHTS”.
U.S. GOVERNMENT RESTRICTED RIGHTS
❑ Reorient or relocate the receiving antenna.
All Software and related documentation are provided with restricted rights. Use,
duplication or disclosure by the U.S. Government is subject to restrictions as set
forth in subdivision (b)(3)(ii) of the Rights in Technical Data and Computer
Software Clause at 252.227-7013. If you are sub-licensing or using the Software
outside of the United States, you will comply with the applicable local laws of your
country, U.S. export control law, and the English version of this Agreement.
❑ Increase the distance between the equipment and receiver.
❑ Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
STATUTORY RIGHTS
Irish law provides that certain conditions and warranties may be implied in
contracts for the sale of goods and in contracts for the supply of services. Such
conditions and warranties are hereby excluded, to the extent such exclusion, in the
context of this transaction, is lawful under Irish law. Conversely, such conditions
and warranties, insofar as they may not be lawfully excluded, shall apply.
Accordingly nothing in this Agreement shall prejudice any rights that you may
enjoy by virtue of Sections 12, 13, 14 or 15 of the Irish Sale of Goods Act 1893 (as
amended).
❑ Consult the dealer or an experienced radio/TV technician.
CONTRACTOR/MANUFACTURER
The Contractor/Manufacturer for the Software is:
Ca ution
To comply with the limits for the Class B digital device, pursuant to
Part 15 of the FCC Rules, this device must be installed in computer
equipment certified to comply with the Class B limits.
Creative Technology Ltd
31, International Business Park
Creative Resource
Singapore 609921
All cables used to connect the computer and peripherals must be
shielded and grounded. Operation with non-certified computers or
non-shielded cables may result in interference to radio or television
reception.
GENERAL
GENERAL
This Agreement is governed by the laws of the Republic of Ireland. The local
language version of this agreement shall apply to Software acquired in the EU. This
Agreement is the entire agreement between us, and you agree that Creative will not
have any liability for any untrue statement or representation made by it, its agents
or anyone else (whether innocently or negligently) upon which you relied upon
entering this Agreement, unless such untrue statement or representation was made
fraudulently.
This Agreement is binding on you as well as your employees, employers,
contractors and agents, and on any successors and assignees. Neither the Software
nor any information derived therefrom may be exported except in accordance with
the laws of the U.S. or other applicable provisions. This Agreement is governed by
the laws of the State of California (except to the extent federal law governs
copyrights and federally registered trademarks). This Agreement is the entire
agreement between us and supersedes any other understandings or agreements,
including, but not limited to, advertising, with respect to the Software. If any
provision of this Agreement is deemed invalid or unenforceable by any country or
government agency having jurisdiction, that particular provision will be deemed
modified to the extent necessary to make the provision valid and enforceable, and
the remaining provisions will remain in full force and effect. For questions
concerning this Agreement, please contact Creative at the address stated above.
For questions on product or technical matters, contact the Creative technical
support center nearest you.
Mod ific a tions
Any changes or modifications not expressly approved by the grantee
of this device could void the user’s authority to operate the device.
Notic e for Ca na d a
Sa fe ty & Re g ula to ry Info rm a tio n
The following se c tions c onta in notic e s for va rious c ountrie s:
This apparatus complies with the Class “B” limits for radio
interference as specified in the Canadian Department of
Communications Radio Interference Regulations.
CAUTION: This device is intended to be installed by the user in a
CSA/TUV/UL certified/listed IBM AT or compatible personal
computers in the manufacturer’s defined operator access area. Check
the equipment operating/installation manual and/or with the
equipment manufacturer to verify/confirm if your equipment is
suitable for user-installed application cards.
Cet appareil est conforme aux normes de CLASSE “B”
d’interference radio tel que spe’cifie’ par le Ministère Canadien des
Communications dans les règlements d’interfe’rence radio.
SPECIAL PROVISIONS APPLICABLE TO THE EUROPEAN UNION
IF YOU ACQUIRED THE SOFTWARE IN THE EUROPEAN UNION (EU),
THE FOLLOWING PROVISIONS ALSO APPLY TO YOU. IF THERE IS ANY
INCONSISTENCY BETWEEN THE TERMS OF THE SOFTWARE LICENSE
AGREEMENT SET OUT EARLIER AND IN THE FOLLOWING
PROVISIONS, THE FOLLOWING PROVISIONS SHALL TAKE
PRECEDENCE.
Com p lia nc e
ATTENTION: Ce carte est destiné à être installé par l’utilisateur,
dans un ordinateur compatible certifié CSA/TUV/UL ou listé IBM
AT, à l’intérieur de la zone définie par le fabricant. Consulter le mode
d’emploi ou le fabricant de l’appareil pour vérifier ou confirmer si
l’utilisateur peut y installer lui-même des cartes périphériques.
This product conforms to the following Council Directive:
DECOMPILATION
❑ Directive 89/336/EEC, 92/31/EEC (EMC)
You agree not for any purpose to transmit the Software or display the Software’s
object code on any computer screen or to make any hard copy memory dumps of
the Software’s object code. If you believe you require information related to the
interoperability of the Software with other programs, you shall not decompile or
disassemble the Software to obtain such information, and you agree to request such
information from Creative at the address listed earlier. Upon receiving such a
request, Creative shall determine whether you require such information for a
legitimate purpose and, if so, Creative will provide such information to you within
a reasonable time and on reasonable conditions.
Notic e for the USA
FCC Part 15: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
LIMITED WARRANTY
EXCEPT AS STATED EARLIER IN THIS AGREEMENT, AND AS
PROVIDED UNDER THE HEADING “STATUTORY RIGHTS”, THE
SOFTWARE IS PROVIDED AS-IS WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTIES OR CONDITIONS OF
communications. However, this notice is not a guarantee that
interference will not occur in a particular installation. If this
Graphics Blaster RIVA TNT2 Value Installation Guide 27
De c la ra tion of Conform ity
According to the FCC96 208 and ET95-19 documents,
Name:
Creative Labs Inc.
Address:
1901 McCarthy Boulevard
Milpitas, CA. 95035
United States
Tel: (408) 428-6600
declares under its sole responsibility that the product
Trade Name: Creative Labs
Model Number: CT6890
has been tested according to the FCC / CISPR22/85
requirements for Class B devices and found compliant with
the following standards:
EMI/EMC:
ANSI C63.4 1992, FCC Part 15 Subpart B
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesirable operation.
Ce matériel est conforme à la section 15 des régles FCC. Son
Fonctionnement est soumis aux deux conditions suivantes:
1. Le matériel ne peut étre source D’interférences et
2. Doit accepter toutes les interférences reques, Y compris
celles pouvant provoquer un fonctionnement indésirable.
Compliance Manager
Creative Labs, Inc.
25 February, 1999
No part of this publication may be reproduced or transmitted in any form or by any means without the prior written consent of Creative Technology Ltd.
Copyright © 1999 Creative Technology Ltd. All rights reserved.
Version 1.0
June 1999
Graphics Blaster is a trademark of Creative Technology Ltd.
NVIDIA, RIVA, RIVA TNT, and RIVA TNT2 are trademarks of NVIDIA Corporation.
Colorific is a registered trademark of Sonnetech, Ltd. 3Deep is a trademark of Sonnetech, Ltd.
All other products are trademarks or registered trademarks of their respective owners.
|